Bluetooth Based Home Control and Real-Time Energy Consumption Monitoring System through Smartphone

Yusnita Rahayu; Muhammad Ibnu Hidayat

doi:10.31258/ijeepse.2.3.5-9

Yusnita Rahayu Universitas Riau, Indonesia
Muhammad Ibnu Hidayat Universitas Riau, Indonesia

DOI: https://doi.org/10.31258/ijeepse.2.3.5-9

Abstract viewed: 561 times

PDF downloaded: 312 times

Keywords: Bluetooth, Smart Home, Monitoring System, Energy Consumption

Abstract

Energy consumption is one of the most important, for it is necessary to control the use of home lighting as needed. Monitoring is important, in order to know the quality of electricity supply in the system, identifying disruption events, and to calculate the amount of electrical energy consumption periodically. To achieve the objectives mentioned above, two schemes for home control and monitoring the electrical quantities in real-time have been developed. The first scheme presents Bluetooth based home control. It uses an HC-05 Bluetooth module and Bluetooth Controller mobile application for switching on / off the appliances. Relay and LEDs are used as loads to demonstrate the working of the system. This system is based on Arduino Uno microcontroller board. Arduino Integrated Development Environment (IDE) is used for developing the necessary software. The second scheme uses the current sensor ACS712-20A for monitoring of voltage, current, and energy consumption. The measurement results include voltage, current, power, and the amount of energy consumption that is displayed by LCD 16*2.

References

[1] Shiu, K, "Ubiquitous Smart Home System Using Android Application", International Journal of Computer Networks & Communications (IJCNC), Vol.6, No.1, 2014.

[2] Dhiraj, S., Veena, M, "Implementation of Interactive Home Automation System Based on Email and Bluetooth Technologies", International Conference on Information Processing (ICIP) Vishwakarma Institute of Technology, Dec 16-09, 2015.

[3] Dikpride, D., Ady, K., Komarudin, Mardiana, Gigih, F. N, "Smart Monitoring of Electrical Quantities Based on Single Board Computer BCM2835", Proc. of 2015 2nd Int, Conference on Information Technology, Computer and Electrical Engineering (ICITACEE), Oct 16-18th, 2015.

[4] Gill, K., Yang, S. H., Yao, F., and Lu, X, "A zigbee-based home automation system", IEEE Trans. Consumer Electron, vol. 55, no. 2, pp. 422-430, May. 2009.

[5] Baoan, L., Jianjun, Y, "Research and application on the smart home based on component technologies and Internet of Things", 2011.

[6] Han, J., Choi, C. S., and Lee, I, "More efficient home energy management system based on ZigBee communication and infrared remote controls", IEEE Trans. Consumer Electron, vol. 57, no. 1, pp. 85-89, Feb. 2011.

[7] Lei, L., YangZhen, C., Huaping, Z., Hongxu, M., Jianping, L, "The application of hall sensors ACS712 in the protection circuit of controller for humanoid robots", International Conference on Computer Application and System Modeling (ICCASM), 2010.

[8] Temy, N., Sherwin, R. U. A., Meita, R, "Sistem Monitoring Konsumsi Energi Listrik Secara Real Time Berbasis Mikrokontroler", E-journal Teknik Elektro dan Komputer, Vol.4 No.5, 2015.

[9] Mario, C., Giovanni, P, "A Novel Energy Management Approach for Smart Homes Using Bluetooth Low Energy", IEEE Journal On Selected Areas in Communications, Vol. 33, No. 12, December. 2015.

[10] Eric, R., Giuseppe, C., Andreas, F. M, "Energy-Delay Tradeoff andDynamic Sleep Switching for Bluetooth-Like Body-Area Sensor Networks", IEEE TRANSACTIONS ON COMMUNICATIONS, Vol. 60, No. 9, 2012.