Design and Implementation Six-Steps Inverter Using Fuzzy Sugeno in Permanent Magnet Synchronous Machines

Reza Sarwo Widagdo; Santoso; Izzah Aula Wardah

doi:10.31258/ijeepse.5.3.67-72

Reza Sarwo Widagdo Universitas 17 Agustus 1945 Surabaya, Indonesia
Santoso Universitas 17 Agustus 1945 Surabaya, Indonesia
Izzah Aula Wardah Universitas 17 Agustus 1945 Surabaya, Indonesia

DOI: https://doi.org/10.31258/ijeepse.5.3.67-72

Abstract viewed: 259 times

pdf downloaded: 262 times

Keywords: Fuzzy Logic Control, Permanent Magnet Synchronous Machines, Six-Steps Inverter

Abstract

Controlling the speed of the permanent magnet synchronous machines plays an essential role in the industrial process and keeps the permanent magnet synchronous machines running quickly and efficiently. Even if the load changes, the rate speed of the permanent magnet synchronous machines should be adjusted to a constant speed. An excellent permanent magnet synchronous machines speed control system must respond quickly and accurately. However, in practice, rarely find a permanent magnet synchronous machines controlled to achieve a certain speed. This research presents an analysis of fuzzy logic control using seven membership functions for speed control of permanent magnet synchronous machines. Rotor speed control is performed on the rotor voltage by changing the duty cycle value. This voltage change affects the torque of the engine. Adjust the speed by changing the input voltage of the permanent magnet synchronous machines with the six-steps inverter. In the open-loop test (without control), the system cannot reach the desired setting and will only run after input from the throttle. In a closed loop (using fuzzy logic control), the system can achieve the desired setting in 90 seconds even if the setpoint is changed and can move to the setpoint.

References

Fan, S., & Tong, C. Model predictive current control method for PMSM drives based on an improved prediction model. Journal of Power Electronics, 20(6), 1456-1466, 2020.

Z. Deng and X. Nian, "Robust control of permanent magnet synchronous motors," in IEEE/CAA Journal of Automatica Sinica, vol. 2, no. 2, pp. 143-150, 10 April 2015.

Ma, Y., & Li, Y. Active disturbance compensation is based on robust control for the permanent magnet synchronous motor speed regulation system. Applied Sciences, 10(2), 709, 2020.

S. Driss, S. Farhangi and M. R. Nikzad, "Low switching frequency model predictive control of PMSM drives for traction applications," 2018 9th Annual Power Electronics, Drives Systems and Technologies Conference (PEDSTC), pp. 300-305, 2018.

A. Ayad, P. Karamanakos, R. Kennel and J. Rodríguez, "Direct model predictive control of bidirectional quasi-Z-source inverters fed PMSM drives," 2017 11th IEEE International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERING), pp. 671-676, 2017.

X. Sun et al., "MPTC for PMSMs of EVs With Multi-Motor Driven System Considering Optimal Energy Allocation," in IEEE Transactions on Magnetics, vol. 55, no. 7, pp. 1-6, July 2019.

X. Yuan, S. Zhang, and C. Zhang, "Enhanced Robust Deadbeat Predictive Current Control for PMSM Drives," in IEEE Access, vol. 7, pp. 148218-148230, 2019.

De Soricellis, M., Da Ru, D., & Bolognani, S. A robust current control based on proportional-integral observers for permanent magnet synchronous machines. IEEE Transactions on Industry Applications, 54(2), 1437-1447, 2017.

M. Abdelrahman, C. Hackl, R. Kennel, and J. Rodriguez, "Sensorless Predictive Speed Control of Permanent-Magnet Synchronous Generators in Wind Turbine Applications," PCIM Europe 2019; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, pp. 1-8, 2019.

Bansal, U. K., & Narvey, R. Speed control of DC motor using fuzzy PID controller. Advance in Electronic and Electric Engineering, 3(9), 1209-1220, 2013.

P. K. Khanke and S. D. Jain, "Comparative analysis of speed control of BLDC motor using PI, simple FLC and Fuzzy - PI controller," 2015 International Conference on Energy Systems and Applications, pp. 296-301, 2015.

X. Sun, Z. Shi, G. Lei, Y. Guo, and J. Zhu, "Analysis and Design Optimization of a Permanent Magnet Synchronous Motor for a Campus Patrol Electric Vehicle," in IEEE Transactions on Vehicular Technology, vol. 68, no. 11, pp. 10535-10544, Nov. 2019.

S. Zhao, X. Huang, Y. Fang, and H. Zhang, "DC-Link-Fluctuation-Resistant Predictive Torque Control for Railway Traction Permanent Magnet Synchronous Motor in the Six-Step Operation," in IEEE Transactions on Power Electronics, vol. 35, no. 10, pp. 10982-10993, Oct. 2020.

F. Momen, K. Rahman and Y. Son, "Electrical Propulsion System Design of Chevrolet Bolt Battery Electric Vehicle," in IEEE Transactions on Industry Applications, vol. 55, no. 1, pp. 376-384, Jan.-Feb. 2019.

Y.-C. Kwon, S. Kim, and S. -K. Sul, "Six-Step Operation of PMSM With Instantaneous Current Control," in IEEE Transactions on Industry Applications, vol. 50, no. 4, pp. 2614-2625, July-Aug. 2014.

Liu, X., & Zhang, Q. Robust current predictive control-based equivalent input disturbance approach for PMSM drive. Electronics, 8(9), 1034, 2019.

Liu, J., & Wang, X. Advanced sliding mode control for mechanical systems (pp. 31-35). Berlin: Springer, 2012.

J. Ma, J. Zhao, J. Sun and C. Yan, "A novel PMSM speed control scheme based on sliding-mode and fuzzy disturbance observer," IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, pp. 1704-1710, 2017.